手机彩票网

What are the specifications of the drive chain

Release time: 20-10-2018
Summary:

The transmission chain is relatively standard. The specifications of plate chain, double speed chain, roller chain are too cumbersome. Here are some of your most commonly used ones. Drive chain points […]

The transmission chain is relatively standard. The specifications of plate chain, double speed chain, roller chain are too cumbersome. Here are some of your most commonly used ones.

分为A系,和B系。 Transmission chain is divided into A series and B series.

The A series conforms to the size specifications of the US chain standard; the B series conforms to the European (mainly UK) two chains with little difference;

The A series of chains have a certain proportion of rollers and pins, and the main sizes and pitches of B series parts do not have a significant proportion. Except for the B series, the 12B specifications are lower than the A series, and the rest of the specifications are the same as the A series. product

In fact, it doesn't matter, but the landlord must pay attention to it. The safe choice of the chain is that the use torque must be more than three times the limit torque.

Here are some common specifications for you based on my information:

A series is commonly used: (As for the parameters such as pitch, etc., I will give you a URL to see later)

* 03C-1 Chain number: * 15 One point Ultimate pulling force: 1.80KN

* 04C-1 Chain number: * 25 Two points Ultimate pulling force: 3.50KN

* 06C-1 Chain number: * 35 Three points Ultimate pulling force: 7.90KN

08A-1 chain number: 40 quarters ultimate pulling force: 14.10KN

10A-1 chain number: 50 five minutes Ultimate pulling force: 22.20KN

12A-1 chain number: 60 six minutes Ultimate pulling force: 31.80KN

16A-1 chain number: 80 eighth ultimate pulling force: 56.70KN

20A-1 chain number: 100 one inch Ultimate pulling force: 88.50KN

24A-1 chain number: 120 twelve minutes Ultimate pulling force: 127.80KN

28A-1 chain number: 140 fourteen points ultimate pulling force: 172.40KN

32A-1 chain number: 160 sixteen minutes Ultimate pulling force: 226.40KN

36A-1 chain number: 180 eighteen minutes Ultimate pulling force: 1.80KN

Among them, one to three minutes are mostly used for transmission parts with small precision mechanical torque, such as replacing 45 ° bevel gears for multi-axis linkage, etc., and one to three minutes are mostly used for conveyor belt toothboxes and transmission parts. Transmission, after eight minutes, are used for heavy-duty mechanical transmission, such as diesel engines, generators, electric hoists, cranes, elevators, forklifts, cranes and other occasions with large horizontal and vertical torque.

The following are the parameters of the B chain:

* 03B-1 chain number: * 15 one point

* 04B-1 Chain number: * 25 Two points Ultimate pulling force: 3.00KN

* 05B-1 Chain number: * 35 Three points Ultimate pulling force: 5.00KN

08B-1 chain number: 40 quarters ultimate pulling force: 18.10KN

10B-1 chain number: 50 five minutes Ultimate pulling force: 22.40KN

12B-1 chain number: 60 six minutes Ultimate pulling force: 29.00KN

16B-1 chain number: 80 eighth ultimate pulling force: 60.70KN

20B-1 chain number: 100 one inch Ultimate pulling force: 95.50KN

24B-1 chain number: 120 twelve minutes Ultimate pulling force: 160.00KN

28B-1 chain number: 140 fourteen minutes Ultimate pulling force: 200.00KN

32B-1 chain number: 160 sixteen minutes Ultimate pulling force: 250.40KN