手机彩票网

Getting started with mechanical chains

Release time: 28-03-2018
Summary:

With the development of the times and the upgrading of industrialization, the development of various industries in China requires the support of the chain as the cornerstone.

With the development of the times and the upgrading of industrialization, the development of various industries in China requires the support of the chain as the cornerstone. The mechanical chain manufacturing capacity is the decisive factor for chain manufacturing, and the center of chain manufacturing strength is reflected in the degree of chain manufacturing process. Today, let us understand: what is a mechanical chain!

Chain

Components of a mechanical chain

Mechanical chains generally include gear teeth, cogging, end faces, normal surfaces, tooth top circles, tooth root circles, base circles, and indexing circles.

Gear teeth, referred to as teeth, are each convex part of the gear for meshing. These convex parts are generally arranged in a radial pattern. The gear teeth on the paired gears contact each other to allow the gears to continue meshing. The cogging is on the gear. The space between two adjacent gear teeth; the normal surface refers to the plane perpendicular to the tooth line of the gear teeth; the end surface is the plane perpendicular to the gear or worm axis; the tooth tip circle refers to the circle where the tooth tips are located; the tooth root circle is Refers to the circle where the groove bottom is located.

Maintenance of mechanical chains during use

Lubricating the mechanical chain is a necessary maintenance. This will not only improve work efficiency, but also extend the service life of the chain. But nowadays, due to the untimeliness and inaccuracy of manual lubrication of workers and the poor maintenance consciousness of some workers, the service life of mechanical chains is shortened and the failure rate is high. Therefore, the mechanical chain must remember to fill the lubricant in time during the work, but the lubricant must enter the matching clearance between the roller and the inner sleeve, so as to improve the working conditions and reduce wear.

Application scenarios of mechanical chains

Mechanical chain can be used for shafting transmission of engineering, agricultural machinery, lifting transportation, chemical industry, mining, light industry and other machinery; suitable for high temperature, humid and dusty working conditions, not suitable for high speed, severe impact load and axial transmission Force occasion.

I believe that after reading the above introduction, you already know something about mechanical chains!