手机彩票网

Learn how to clean the mechanical chain

Release time: 10-04-2018
Summary:

A mechanical chain is a metal link or ring, which is mostly used as a chain drive for machine transmission and traction to block traffic passages. However, many people do not clean the mechanical chain during use, which will cause the mechanical chain to be used smoothly.

A mechanical chain is a metal link or ring, which is mostly used as a chain drive for machine transmission and traction to block traffic passages. However, many people do not clean the mechanical chain during use, which will cause the mechanical chain to be used smoothly.

Chain

Cleaning method of mechanical chain

Method 1: Prepare hot soapy water and hand sanitizer, and then take an abandoned toothbrush or a slightly harder brush, and rinse directly with water; but the cleaning effect of this type of cleaning is not very good, and Be sure to wipe dry, otherwise it will easily rust.

Method 2: Prepare a special chain cleaning agent. These cleaning agents are generally imported products. The cleaning effect is good, and the lubrication effect is also very good.

Method 3: Use metal powder. Generally, it is easy to clean the oil on the mechanical chain without using metal powder to clean it, and it will not clean the butter in the inner ring. This type of metal powder is commonly used by mechanics to wash their hands. Some hardware It can be bought at the store. The advantages are no irritation, no injury to hands, and high safety. Pay attention to a large container when cleaning. Take a spoonful of water and rinse it. Remove the mechanical chain and put it in the water to clean it with a hard brush. Since the auxiliary is water, the mechanical chain must be wiped after cleaning. Drying or drying may take longer.


Maintenance after cleaning the mechanical chain

After each cleaning, wiping or cleaning of the mechanical chain with a solvent, be sure to add lubricant, and make sure that the chain is dry before adding lubricant.

Step one: first penetrate the lubricating oil of the chain bearing part, and then wait for it to become viscous or dry, so as to surely lubricate the easy-to-wear parts of the chain. You should know that good lubricating oils, like water at the beginning, are easy to penetrate, but after some time they will become thick or dry, which can provide long-lasting lubrication.

Step 2: After applying the lubricating oil, wipe the excess oil on the chain with a dry cloth to avoid dirt and dust from adhering. Before reinstalling the chain, remember to clean the joints of the chain to ensure that no dirt remains. After the chain is cleaned, some oil must also be applied to the inside and outside of the coupling shaft.