的内环轴承注入的是黏度高的油，一旦被洗掉后，会使内环干涩，不管事后再加上多少的低黏度链条油，都已无事于补。 Do not directly immerse the chain in strongly acidic and strong alkaline cleaners such as diesel, gasoline, kerosene, WD-40, and degreaser, because the inner ring bearing of the chain
is injected with high viscosity oil, once it is washed off Later, the inner ring will be dry, no matter how much low-viscosity chain oil is added afterwards, there is no need to make up for it.
Recommended cleaning methods
You can also use hot soapy water and hand sanitizer, or use a discarded toothbrush or a slightly harder brush. Wash directly with water. The cleaning effect is not very good, and it needs to be dried after cleaning, otherwise it will rust.
Dedicated chain cleaners are generally imported products, which have good cleaning effects and good lubrication effects. They are sold by professional car shops, but they are more expensive and are also available on Taobao. You can consider it if you have a good economic foundation.
For metal powder, find a larger container, take a spoonful of water and rinse it. Remove the chain and put it in the water to clean it with a harder brush.
Advantages: The oil on the chain can be easily cleaned, and the butter in the inner ring is generally not washed off. It is not irritating and does not hurt hands. This thing is commonly used by mechanics to wash their hands. , Strong security. Larger hardware stores are available.
Disadvantages: Because the auxiliary is water, the chain must be wiped or dried after cleaning, which takes a long time.
Using metal powder to clean the chain is my usual cleaning method. I personally feel that the effect is better. I recommend it to everyone. If anyone has any objection to this cleaning method, they can make suggestions. Riders who need to remove the chain frequently for cleaning suggest installing a magic buckle, which saves time and effort.
After each cleaning, wiping or cleaning the chain with solvent, be sure to add lubricating oil, and make sure that the chain is dry before adding lubricating oil. First lubricate the chain bearing parts, and then let it become thick or dry. This will surely lubricate the easy-to-wear parts of the chain (both joints on both sides). Good lubricating oil initially feels like water and easily penetrates, but after some time it will become sticky or dry, which can provide long-lasting lubrication.
After applying the lubricating oil, use a dry cloth to wipe excess oil from the chain to prevent dirt and dust from adhering. Before reinstalling the chain, remember to clean the joints of the chain to ensure that no dirt remains. After the chain is cleaned, lubricating oil must be applied to the inside and outside of the connecting shaft when assembling the magic buckle.